Cold Start
Cold Start
Holts Cold Start is a specialised aerosol starting aid designed to get your engine firing in no time. It works by making the air/fuel mixture more combustible, which is even more crucial in cold weather.
Whether you’re on the way to work or on your way back from a staycation, Cold Start is a must-have for engines in cold weather conditions.
Use only as directed. Do not over-apply. Avoid spraying near exposed heating elements or glow plugs.
- Fast acting
- Suitable for petrol and diesel engines
- Works in cold temperatures
- Helps after long periods of inactivity
Product Description
With its fast-acting formulation, Holts Cold Start delivers swift results and a boost of ignition power across a wide range of vehicles, from cars and motorcycles to trucks and agricultural machinery. By increasing the combustion rate of the air/fuel mixture, Holts Cold Start makes it easier for engines to start firing in as little as a couple of minutes.
Holts Cold Start is a specialised aerosol starting aid designed to assist in firing up engines, particularly in cold weather conditions or following extended periods of inactivity. Crafted with a potent formulation, this product aids in overcoming the challenges of cold starts, ensuring smoother engine ignition even in freezing temperatures.
Simply spray a short burst of the product into the air intake system, and experience enhanced engine ignition with minimal effort.
Suitable for:
- Petrol engines, including direct and indirect injection systems, turbocharged and intercooled engines. Suitable for use with catalytic converters and DPF-equipped vehicles when used as directed.
- Diesel engines, including injector, common rail, turbocharged and intercooled engines. Safe for Diesel Particulate Filters (DPFs).
Name: Holts Cold Start 400ml
Manufacturer’s Code: HMTN1201A
How to Use:
Holts Cold Start is suitable for both petrol and diesel engines, but to get the engines started using Holts Cold Start, the steps are slightly different between petrol and diesel engines.
Diesel
1. Ask a friend or family member for help. Instruct them to sit in the driver’s seat with the key in the ignition.
2. Locate the air intake.
3. Instruct your friend or family member to turn the engine over and spray a short burst (1–2 seconds) into the air intake while the engine is turning over.
Petrol
1. Locate the air intake.
2. Spray Cold Start into the air intake for 1-2 seconds.
3. Turn the engine over.
You can find SDS/regulatory safety information for our products here. You can also find this link at the bottom of every page on Holts’ website.
This link takes you to a database containing MSDS sheets for all Holts products, including Tyreweld, Gun Gum, Radweld, Wondarweld, De-Icer and more. Simply select the relevant product in the drop down and you will be provided with all regulatory information for any Holts product.
If you have any further questions or concerns about Holts products or our ingredients, you can contact our chemists here. Our experienced team use rigorous testing and follow regulatory procedures to bring you safe, high quality products, and our team will be happy to help you with your query.
Cold Start works by increasing the combustibility of the air/fuel mixture in the engine. Essentially, it makes it easier for the engine to produce the combustion needed to power the engine.
During cold weather, the metal components of your car can constrict and fluids thicken, making it harder for them to flow through the system. This might mean that more power is required to start the engine.
Cold Start should be used if you notice signs that your car is struggling to start in cold or damp weather. Additionally, if the car hasn’t been driven in a long time, Cold Start can give the engine the boost it needs to get started.
Using Cold Start when necessary can help reduce strain on the engine and battery during difficult starts. In turn, this helps to prolong the life of your car.
Product Description
With its fast-acting formulation, Holts Cold Start delivers swift results and a boost of ignition power across a wide range of vehicles, from cars and motorcycles to trucks and agricultural machinery. By increasing the combustion rate of the air/fuel mixture, Holts Cold Start makes it easier for engines to start firing in as little as a couple of minutes.
Holts Cold Start is a specialised aerosol starting aid designed to assist in firing up engines, particularly in cold weather conditions or following extended periods of inactivity. Crafted with a potent formulation, this product aids in overcoming the challenges of cold starts, ensuring smoother engine ignition even in freezing temperatures.
Simply spray a short burst of the product into the air intake system, and experience enhanced engine ignition with minimal effort.
Suitable for:
- Petrol engines, including direct and indirect injection systems, turbocharged and intercooled engines. Suitable for use with catalytic converters and DPF-equipped vehicles when used as directed.
- Diesel engines, including injector, common rail, turbocharged and intercooled engines. Safe for Diesel Particulate Filters (DPFs).
Name: Holts Cold Start 400ml
Manufacturer’s Code: HMTN1201A
How to Use:
Holts Cold Start is suitable for both petrol and diesel engines, but to get the engines started using Holts Cold Start, the steps are slightly different between petrol and diesel engines.
Diesel
1. Ask a friend or family member for help. Instruct them to sit in the driver’s seat with the key in the ignition.
2. Locate the air intake.
3. Instruct your friend or family member to turn the engine over and spray a short burst (1–2 seconds) into the air intake while the engine is turning over.
Petrol
1. Locate the air intake.
2. Spray Cold Start into the air intake for 1-2 seconds.
3. Turn the engine over.
You can find SDS/regulatory safety information for our products here. You can also find this link at the bottom of every page on Holts’ website.
This link takes you to a database containing MSDS sheets for all Holts products, including Tyreweld, Gun Gum, Radweld, Wondarweld, De-Icer and more. Simply select the relevant product in the drop down and you will be provided with all regulatory information for any Holts product.
If you have any further questions or concerns about Holts products or our ingredients, you can contact our chemists here. Our experienced team use rigorous testing and follow regulatory procedures to bring you safe, high quality products, and our team will be happy to help you with your query.
Cold Start works by increasing the combustibility of the air/fuel mixture in the engine. Essentially, it makes it easier for the engine to produce the combustion needed to power the engine.
During cold weather, the metal components of your car can constrict and fluids thicken, making it harder for them to flow through the system. This might mean that more power is required to start the engine.
Cold Start should be used if you notice signs that your car is struggling to start in cold or damp weather. Additionally, if the car hasn’t been driven in a long time, Cold Start can give the engine the boost it needs to get started.
Using Cold Start when necessary can help reduce strain on the engine and battery during difficult starts. In turn, this helps to prolong the life of your car.
