Gun Gum Paste

Gun Gum Paste

Holes in your exhaust system might seem like a small problem at first, but they’re the kind of thing that can build and cause a big headache if left unfixed.

Fumes leaking out of your exhaust in the wrong place can increase your car’s emissions, and they can also damage other parts of your car.

Replacing the damaged exhaust system or other car parts can be costly.

Luckily, repairing your own exhaust is not only possible but also safe and cost-effective, thanks to Holts Gun Gum.

  • Quick and easy exhaust system repair
  • Creates a gas tight seal
  • Permanent repair guaranteed when used with the recommended accessory

Our Gun Gum range has been created to make it easy for you to repair exhaust problems at home. We have a range of accessories which, when used with the Gun Gum Paste, create a permanent repair.

Holes in your exhaust system might seem like a small problem at first, but they’re the kind of thing that can build up and cause a big headache if left unfixed.

Fumes leaking out of your exhaust in the wrong place can increase your car’s emissions, and they can also damage other parts of your car. Replacing the damaged exhaust system or other car parts can be costly, so luckily repairing your own exhaust is not only possible but also safe and cost-effective thanks to Holts Gun Gum.

This specialist exhaust repair paste is designed to be used with the Gun Gum range of repair bandages; together, these products create a system that ensures a permanent, gas-tight seal for your faulty exhaust assembly.

 

  • Quick and easy exhaust system repair
  • Works on hard to reach places
  • Creates a gas tight seal
  • Permanent repair guaranteed when used with the recommended accessory

 

Why You Should Use Holts Gun Gum

Holts Gun Gum is a leading car exhaust repair putty which has been trusted by car lovers for decades. It has been developed to provide an easy DIY solution to a damaged exhaust.

Previously if an exhaust developed a small hole or crack, you would have no choice but to replace the damaged component or, in some cases, the entire exhaust assembly. This was an expensive and inconvenient undertaking, all to repair a small hole that could be easily patched up.

Recognising this, Holts developed the Gun Gum range to provide a permanent repair for faulty exhaust systems. Combining both a heat-resistant repair putty and a selection of durable metal repair bandages, the Gun Gum range makes it possible to repair minor problems with your exhaust system – meaning no expensive repair bills and minimal time off the road.

And best of all, the Holts Gun Gum system is quick and easy to use, so most car owners that are confident at DIY should have no problem using it to repair their exhaust.

Name: Holts Gun Gum Paste 200g
Manufacturer’s Code: GG2R
How to Use:

Ensure that the exhaust system is cool to the touch before starting the repair process. Park the vehicle in a well-ventilated area and turn off the engine.

Use a wire brush or sandpaper to clean the area around the hole or crack on the exhaust system. Remove any rust, dirt, or debris from the surface to ensure proper adhesion of the Gun Gum Paste.

Thoroughly knead the Gun Gum Paste to ensure that it is well mixed and pliable. This step helps activate the sealant and ensures uniform consistency for effective application.

Take a small amount of Gun Gum Paste and roll it into a ball. Press the paste firmly into the hole or crack on the exhaust system, ensuring that it completely fills the damaged area. Use your fingers or a spatula to mould and smooth the paste as needed.

Once the Gun Gum Paste is applied, allow it to cure according to the manufacturer’s instructions.
After the Gun Gum Paste has cured, start the engine and check for any signs of leaks or exhaust fumes escaping from the repaired area. If necessary, make additional repairs or adjustments to ensure a complete seal.

SDS Information

Yes, Gun Gum is MOT approved and will help you to repair holes or damage in your exhaust before your vehicle gets tested. Using Gun Gum on a damaged exhaust could help it pass the MOT as it creates a permanent, gas tight seal. If you’re worried about your exhaust and how much it will cost to fix at a garage, Gun Gum makes it easy to repair it yourself at home.

You don’t need to dismantle the exhaust, just use Gun Gum paste or a bandage or wrap over the hole for a fast repair. You can view the full range of Gun Gum products here.

Gun Gum is a permanent repair, so you can use it before an MOT or whenever you need to fix your exhaust, knowing that the repair will last for the lifetime of your exhaust.

For more information about using Gun Gum, you can read the articles below.

We would advise that you check the details of your warranty with your provider before attempting a repair of any type. Gun Gum provides a permanent gas tight seal which is MOT approved, so it is the quickest and easiest way to repair an exhaust. However if your car is currently under warranty you should check the terms of the agreement and also investigate if the necessary exhaust repairs are covered under the warranty.

Yes, Holts Gun Gum is ideal for fixing cracked exhausts, provided the damaged part is in reasonable condition and is still fully attached. You can use Gun Gum to fix cracks on straight and curved pipes, DPFs, back boxes, and catalytic converters, with a permanent repair guaranteed.

Yes, Holts Gun Gum is designed to fix small holes in your exhaust, up to 20mm in size. You can also fix holes on straight and curved pipe, back boxes, DPFs, and catalytic converters. Just make sure you buy the right accessory for your problem area.

Gun Gum is a permanent solution for fixing cracks and holes in the exhaust – meaning it will last for the entire life of your exhaust. You can use Gun Gum knowing that you won’t need to carry out any further repairs to the damaged area (unless your exhaust suffers more serious damage further down the line).

Gun Gum creates a gas tight seal which will not deteriorate over time and is MOT approved, so that you can use it at home to save money on costly exhaust repairs or replacement parts. The Gun Gum range includes paste, bandages and wraps so that you can fix a range of different problems with and they’re all easy to use without specialist tools or experience.

It is completely safe to use Gun Gum on your exhaust. The product forms a gas tight seal which is solid and MOT-approved – helping to keep your vehicle on the road and operating safely and efficiently. We have a range of accessories which fit around the damaged area and, when used with Gun Gum Paste, form a safe and permanent repair. You can read more about how to find the right products to fix your exhaust here.

Our UK research and development team constantly test our products to ensure that we evolve to meet the needs of today’s vehicles.

Yes, the entire Holts Gun Gum range is designed to be safe to use with most makes and models. The product is safe and effective to use on all exhaust materials.

Gun Gum Repair Paste works when used to fix small holes and cracks in an exhaust system. You must use the right Gun Gum Repair Bandage with the putty to ensure a permanent repair.

The Gun Gum range includes the Gun Gum Paste and a range of bandage accessories which, when used together, can fix holes across your exhaust system. The table below will help you to choose the right accessory for your problem. Always use a bandage with Gun Gum Paste for a guaranteed permanent seal.

Our Gun Gum range has been created to make it easy for you to repair exhaust problems at home. We have a range of accessories which, when used with the Gun Gum Paste, create a permanent repair.

Holes in your exhaust system might seem like a small problem at first, but they’re the kind of thing that can build up and cause a big headache if left unfixed.

Fumes leaking out of your exhaust in the wrong place can increase your car’s emissions, and they can also damage other parts of your car. Replacing the damaged exhaust system or other car parts can be costly, so luckily repairing your own exhaust is not only possible but also safe and cost-effective thanks to Holts Gun Gum.

This specialist exhaust repair paste is designed to be used with the Gun Gum range of repair bandages; together, these products create a system that ensures a permanent, gas-tight seal for your faulty exhaust assembly.

 

  • Quick and easy exhaust system repair
  • Works on hard to reach places
  • Creates a gas tight seal
  • Permanent repair guaranteed when used with the recommended accessory

 

Why You Should Use Holts Gun Gum

Holts Gun Gum is a leading car exhaust repair putty which has been trusted by car lovers for decades. It has been developed to provide an easy DIY solution to a damaged exhaust.

Previously if an exhaust developed a small hole or crack, you would have no choice but to replace the damaged component or, in some cases, the entire exhaust assembly. This was an expensive and inconvenient undertaking, all to repair a small hole that could be easily patched up.

Recognising this, Holts developed the Gun Gum range to provide a permanent repair for faulty exhaust systems. Combining both a heat-resistant repair putty and a selection of durable metal repair bandages, the Gun Gum range makes it possible to repair minor problems with your exhaust system – meaning no expensive repair bills and minimal time off the road.

And best of all, the Holts Gun Gum system is quick and easy to use, so most car owners that are confident at DIY should have no problem using it to repair their exhaust.

Gun Gum Paste

OTHER PRODUCTS YOU MAY LIKE